From 2012hs.igem.org

(Difference between revisions)

Latest revision as of 12:57, 20 March 2013

Sponsors

February

February 25 Saturday

Today was the beginning of our lab lessons.

Accompinied by the Fatih University 2012 iGEM Team, we learned how to prepare LB Broth from our advisor Burak Yılmaz.

Procedures for LB Broth Preparation

March

March 5 Monday

Project Decision

1st Day of Brainstorming

Ideas

Battery Bacteria

-Bacteria producing electricity
 -Inspired by the original Geobacter, we wanted to increase the electricity output.

Sound Insulator Bacteria

-Bacteria with the ability to absorb sound
 -With the genes taken from the pigment Melanin, we wished to use them for sound insulating purpouses.

Water Cleaner Bacteria

-Bacteria able to precipitate salt in salty water.
 -By causing the salt to precipitate, we were going purify the sea water.

Radio-Reducer Bacteria

-Bacteria which can absorb radiation
 -The radio-absorbtion ability of cactus was to be implemented to E.coli.

March 9 Friday

Together with the Fatih Team, we learned how to do isolation.

March 10 Saturday

We isolated the Red Fluorescent Protein, and with this we learned how to do isolation both practically and teorically.

March 12 Monday

Project Decision

2nd Day of Brainstorming

Ideas

Dandruff Exterminator Bacteria

-Bacteria with the ability to cure dandruff
 -Using the genes of Aloe Vera and Eucalyptus globolus was going to be done.

Anti-stink Bacteria

-Bacteria with the ability of removing trimethylaminuria
 -With the required enzymes, the fish odor trimethylaminuria will be removed.

Firefighter Bacteria

-Bacteria working with the principle of a fire extinguisher
 -The bacteria will consume the oxygen in the air which will leave the fire extinguished.

Paper Cleaner Bacteria

-Bacteria which can consume the ink on paper
 -The bacteria will digest the ink which will result as a clean paper.

Do-not-'Die'betes Bacteria

-Bacteria with the ability to produce insulin
 -Insuling level detection was going to be followed by insulin production.

March 19 Monday

We decided what our project was going to be.

Final Ideas

Battery Bacteria
Sound Insulator Bacteria
Water Cleaner Bacteria
Radio-Reducer Bacteria
Dandruff Exterminator Bacteria
Anti-stink Bacteria
Firefighter Bacteria
Paper Cleaner Bacteria
Do-not-'Die'betes Bacteria

Winner: Anti-stink Bacteria

With the decision of what we will do for our project, we started searching for the required the data for our project. We were divided into groups to search for the necessary data required. Since our project was going to be on a bacteria that removes bad smell and produces pleasent odor, we had to look for the following:

Bad odors

-Trimethylamine
-Cadaverine
-Putrescine

Good odors

-Vanillin
-Limonene
-Eugenol
-Benzaldehyde
-Cinnamaldehyde
-Geraniol

Receptors
A suitable construction

March 22 Thursday

We arrived at the university and saw the preparations for the birthday of our dear advisor Mrs Gunduz. We had no idea so it was a suprise for us as well. We congragulated her and returned back(the birthday cake was awesome).

We determined what the name of our project will be. The name is going to be "FreshEcoli".

                                                    F r e s h E c o l i

March 24 Saturday

We started doing our first electrophoresis. We weren't there when the gel preparation was taking place as it was exam week. Everything was great, especially the part where we pipetted plasmid-coloring agent mixture was fun.

Today was also the day of our first digestion. The process was done with great speed and we did great.

The transformation that we missed out on was done today. The plates were ready for us to spread the colonies so we just did transformation and did not have to prepare any LB Agar.

March 31 Saturday

We did ligation for the first time. The ligation was successful and this meant that our education was complete.

April

April 2 Monday

We tried to clarify how the project would work.

Two ideas were given

1)A system consisting of 2 bacterias with 1 producing bad smell and the other producing good smell. 1 of these will give put bad smell and the other will get rid of this smell and turn into something good and also inhibate the other one.

2)A system in which a bacteria removes bad smell and uses the products to produce good smell. The bacteria will use receptors to detect the products of the removal process and use them to give out good smell.

April 5 Thursday

We discussed the ideas from last saturday. We weren`t able to find a conclusion.

Also our research topics were discussed and we learned what the chemical structure of the aromas are. The enzymes required were searched. With this we learned that the limonene, banana and wintergreen were in the iGEM kit.

The enzymes required to produce geraniol was learned. We could order them now.

For information on Geraniol: http://en.wikipedia.org/wiki/Geraniol

April 7 Saturday

We electrophorased RFP once again to fully comprehend the procudure.

April 9 Monday

We continued our research on the compatible enzymes and aromas for our project but sadly nothing was found. This meant that geraniol was probably going to be our main compound.

The system that is going to be implemented was finally chosen

The First System was the Receptor System The Second System was the Inhıbation System

The Inhibation System was chosen.

The receptor system had the difficulty of finding parts. The inhibation system was more easy to accomplish in comparison to the receptor system.

Our team photo was taken by a group of photographers which were taking pictures of the school for display.

April 21 Saturday

We transformated the parts E0022 and E0032.

These parts are the reporters Cyan Fluorescent Protein(E0022) and Yellow Fluorescent Protein(E0032).

Since these parts have the ability to give off color, we could see if we were successful in doing transformation.

April 26 Thursday

We discussed what we can do for human practice.

Several Ideas Were Given Out:

1)Making a film

2)Making a photonovel

3)Visits to a kindergarden and,a primary school and a high school.

4)Preparing a synthetic biology survey

5)Making a board game

6)Making a computer game

7)Preparing a journal

April 28 Saturday

The LB Media of CFP(E0022) and YFP(E0032) was isolated. The results were positive.

Since we were going to start our project, it had to begin with the iGEM kit. We had to dilute the parts for transformation.

We diluted the following parts:

1)C0061 [http://partsregistry.org/wiki/index.php?title=Part:BBa_C0061]

2)C0062 [http://partsregistry.org/wiki/index.php?title=Part:BBa_C0062]

3)R0062 [http://partsregistry.org/wiki/index.php?title=Part:BBa_R0062]

4)R0063 [http://partsregistry.org/wiki/index.php?title=Part:BBa_R0063]

5)K118024 [http://partsregistry.org/wiki/index.php?title=Part:BBa_K118024]

6)K118025 [http://partsregistry.org/wiki/index.php?title=Part:BBa_K118025]

7)J45120 [http://partsregistry.org/wiki/index.php?title=Part:BBa_J45120]

8)J45200 [http://partsregistry.org/wiki/index.php?title=Part:BBa_J45200]

9)J45320 [http://partsregistry.org/wiki/index.php?title=Part:BBa_J45320]

10)J09855 [http://partsregistry.org/wiki/index.php?title=Part:BBa_J09855]

11)J23100 [http://partsregistry.org/wiki/index.php?title=Part:BBa_J23100]

12)J52034 [http://partsregistry.org/wiki/index.php?title=Part:BBa_J52034]

May

May 2 Wednesday

The diluted parts from last week were tranformated. Not all of us were able to do the procudure before. With this day, everyone had done transformation.

May 9 Wednesday

When we came to the lab, we saw that the transformations from last week were not successful. We transformated the same parts again.

1st Transformation Day - Fail

May 11 Friday

Our arrival to the lab revealed that we couldn't successfully transformate for the second time. This result led us to find our mistake. We did several things to locate our mistake. Now we had nothing to do but wait for a few days to see what's wrong.

2nd Transformation Day - Fail

May 15 Tuesday

The results of our experiments showed that the compotent cells that we have used were not okay. We repeated the process to ensure that we really figured out what the problem is. Yes,the problem was the compotent cells. The only problem was that we needed to make new compotent cells. Since this process takes time and our lack of experience on making compotent cells is huge,this meant great time loss for us.

The last 2 transformations were unsuccessful because our compotent cells did not work properly.

May 18 Friday

We had a new batch of compotent cells and this meant that we could finally hope to see colonies after the transformation.

We transformated the same parts once again. Only this time we had colonies on the plate. This proved success.

3rd Transformation Day - Success

May 21 Monday

We prepared LB media from the colonies of our (finally not fail) transformation plates. We put them in the vacuum furnace for overnight incubation. Now all we had to do was wait.

Our parts were given short names for easier labelling(It was getting really difficult to fit part names like K118024 on 0.5 eppendorfs.).

The tags are listed below:

1)C0061 = C1

2)C0062 = C2

3)J45200 = K0

4)J45320 = K2

5)J45120 = K3

6)K118024 = K4

7)K118025 = K5

8)J23100 = R0

9)R0062 = R2

10)R0063 = R3

11)J09855 = R5

12)J52034 = R7

May 22 Tuesday

We isolated our LB media. When we went to spectrophotometer for the results, it was embrassing. Our plasmids had a concentration of approximately 2 ng/ml. We made another patch of LB media to isolate again.

1st Isolation Day - Fail

May 26 Saturday

We had the same horrible results with the isolation. Again, LB media preparation...

2nd Isolation Day - Fail

May 27 Sunday

Same awesome results were acquired with the isolation. We repeated the process again.

3rd Isolation Day - Fail

May 29 Tuesday

The LB media certainly had colonies in it. So we could isolate to see if we could succeed this time. Unfortunately the nucleic acid concentrations were again too little to digest. This meant that something wrong was happening during the isolation and we couldn't go wrong so many times.

We did experiments to detect what the problem was, what was causing failure?

4th Isolation Day - Fail

May 30 Wednesday

The experiments from yesterday showed that our kit was not doing its job. We conducted one last experiment to be sure.

Another batch of LB media was prepared.

June

June 1 Friday

Another isolation was done today. Since the kit was not working, it was a fail again.

5th Isolation Day - Fail

June 2 Saturday

The last 4 isolations had failed because of the kit. This was the reason for sure.

We ordered a new isolation kit from Fermentas.

We went to the Turkish Olimpiads to watch the singing finals.

We electrophorased yesterday's isolations.

June 3 Sunday

Fermentas reported that the kit was going to arrive tomorrow.

We prepared LB media for the next day's isolation.

We electrophorased yesterday's isolations. The results were awful. We had nothing on the gel. It had probably moved out of the gel.

June 4 Monday

We prepared the American Visa Application Forms for the visa. It consumed hours and wasted our experiment time but we have no choice but to get it.

The LB media from yesterday was isolated with the new Fermentas kit. It was triumph. We had a very high nucleic acid concentration, an average of 100 ng/ul to be exact.

This meant that we could finally pass the isolation step.

6th Isolation Day - Success

June 5 Tuesday

We tried to get a randezvous for the visa application from the U.S. Embassy but sadly, the phones were busy and we couldn't reach them. The risk of not being able to get a visa appeared. We hope that this doesn't happen.

We transformated the following parts again.

1)C0061 2)C0062 3)R0062 4)R0063 5)K118024 6)K118025 7)J45120 8)J45200 9)J45320 10)J09855 11)J23100 12)J52034

The plates were placed in the vacuum furnace for overnight incubation.

The electrophorased the isolations and confirmed that the process was not a blowout again.

We digested these plasmids. The next step was ligation and we could be one step closer to finishing our project.

June 6 Wednesday

We isolated the other 10 parts but the Lysis Solution bubbled during the transfer. When it bubbles, it gets spoilt so the isolation was a fail.

June 7 Thursday

We isolated the parts once more and electrophorased them. The isolation was okay this time.

We digested the DNA and electrophorased them to see the results.

June 8 Friday

Our Visa Application Day was today and we went to the U.S. Ambassy at 12.45. We think that we will be able to get the visa and that there won't be a problem.

We digested the 2 parts and did gel extraction.

We ligated the aroma parts with the Lux casette.

The plasmids were then transformated and placed in the vacuum furnace for overnight incubation

<forum_subtle/>

Revision as of 23:34, 16 June 2012 (view source) Selcuk.igem (Talk \| contribs) (→May 21 Monday) ← Older edit	Latest revision as of 12:57, 20 March 2013 (view source) Alihancelikcan (Talk \| contribs) (Undo revision 10365 by Alihancelikcan (talk))
(One intermediate revision not shown)

Team:AUC Turkey/Notebook